Technology

resistencia-600

Technology

Investment in R&D in order to accelerate and improve our manufacturing system. The whole manufacturing process, from the first until the last operation, is computerized and automated, leaving no margin for error and minimizing the possibility of critical faults.

728-600

Resistance

All our steels are suitable for use in bad weather, because due to their composition they are covered with a protective patina which is resistant to atmospheric corrosion. They are manufactured with the qualities S-235-W and S-355-W (or CT-36) as well as UNE 10155/UNE 36-082.

calidad-600

Quality

Quality is one of the cornerstones of our company’s philosophy. Therefore we have implemented a strict internal and external quality assurance system throughout the manufacturing process. All phases of the manufacturing process are rigorously monitored.

Elaboration

All phases of the manufacturing and installation process, as well as the life cycle of a product, are decisively influenced by its design. Our products are specifically designed to be corrosion-resistant and to ensure a higher level of security, without forgetting about the aesthetics.

Contact →

Project

We have the necessary resources to manage fencing and mesh projects from the initial design all the way to the installation of a perimetral enclosure. This means that our clients are free to invest their human resources in the aspects of their business that really matter to them.

Contact →

Installation

We have a highly qualified staff with many years of experiences in fencing and wire mesh installations; the highest possible quality is therefore guaranteed.

Contact →

Capacity

Our next-generation electrowelding lines are completely automated, which leads to a great manufacturing capacity, rapid deliveries and an excellent quality of the end product.

Contact →

Computerization

The whole production, from the first until the last operation, is computerized and automated, leaving no margin for error and minimizing the possibility of critical faults.

Contact →

Technology

Thanks to constant investment in automation and modernization of our machines as well as solid, continuous training of our staff we are able adapt ourselves quickly to the wide variety of electrowelded wire mesh which exist in the different countries in which we are present.

Contact →

Quality

The wire rolls are tested to make sure that the fulfill the required quality standards (UNE-EN 10244-2 and UNE-EN 10016-2) which we demand from our suppliers (diameter, hardness, zinc coating, resistance, brightness, etc.). The wire supplied to our clients is not only of the highest quality, but also of the suitable type for the intended production.

Contact →

Control

In the production phase, there are a number of control mechanisms to make sure that no faults and no imprecisions occur during the electrowelding process. All external actions, tolerances, welds, folds, heights etc. are carefully reviewed by our quality assurance department.

Contact →

Regulations

Our steels are classified according to UNE-EN 10020:2001, which replaces the previous standard UNE-36010, while structural steels are designed to be in accordance with European standards EN 10025-2: 2004 and EN-10025-4: 2004.

Contact →


Internationalization

We are committed to the internationalization of our products, and today we are present in most EU countries, most of all in Central and Eastern Europe. However, our biggest challenge yet is to reach every part of the globe.

Contact →

Logistics

Given the wide field of activity of logistics providers and the relevance of land transport, we focus mainly on road and rail shipments, but we also use sea and intermodal transport options where they are suitable for our clients.

Contact →

Experience

We ensure that a lack of experience with importing goods does not translate into a handicap for your business. We bring our vast experience to the table to make sure that you are not unnecessarily bothered by this process.

Contact →

Resources

Our constant investment in human and technological resources allows us to fulfill our promise to our clients: the manufacture and delivery of a product of the highest quality, precision, and reliability.

Quality

The quality assurance department examines and analyses all aspects of the manufacturing process, from the raw materials received from our suppliers all the way to production and plastification of the end product.

Quality

The wire rolls are tested to make sure that the fulfill the required quality standards (UNE-EN 10244-2 and UNE-EN 10016-2) which we demand from our suppliers (diameter, hardness, zinc coating, resistance, brightness, etc.). The wire supplied to our clients is not only of the highest quality, but also of the suitable type for the intended production.

Control

In the production phase, there are a number of control mechanisms to make sure that no faults and no imprecisions occur during the electrowelding process. All external actions, tolerances, welds, folds, heights etc. are carefully reviewed by our quality assurance department.

Regulations

Our steels are classified according to UNE-EN 10020:2001, which replaces the previous standard UNE-36010, while structural steels are designed to be in accordance with European standards EN 10025-2: 2004 and EN-10025-4: 2004.

Some of our clients

espana-150
acciona-150
fcc-150
ferrovial-150
ohl-150
Back to Top
UA-66316600-1

Uso de cookies

Este sitio web utiliza cookies para que usted tenga la mejor experiencia de usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.plugin cookies

ACEPTAR
Aviso de cookies